Multiguard
Solutions UK- Northants re-pointing and brickwork
repairs. Exterior property coatings specialists.
Multiguard offer a heavy duty quality wall coating,
sealing your walls from penetrating damp. Contact
us if you have damp brickwork, crumbling walls,
unattractive exterior wall paint, ground damp and
more. We repair damaged brickwork, repoint brick
walls, repair cracked render.
Mukltiguard Solutions will transform your home and
protect it from damp and weathering.
Multiguard are based in Northants and cover all
areas of the UK - Telephone Multiguard in Northants
-
01908-516366 for a friendly reliable
service from the UK property exterior wall coatings
professionals
Multiguard Solutions offer
a high quality property transformation textured
coating system for the renovating and protecting
of your property from penetrating damp. With a genuine
20 year guarantee.
Exterior
Property Walls - Repointing and Repairing House
and Commercial Property Wall and Brickwork
Are your exterior property walls
crumbling and need of repair? Does your brickwork
need repairing, repointing - are your walls flaking
and peeling?
Brick repointing, brickwork repointing services
in Northants and covering the UK
Contact
Us by Email for Queries Relating to
Re-Pointing and Brickwork Repairs in the UK!
POINTING is the
mortar between bricks. A more accurate definition
is that it is the visible edge of the mortar-joint.
The mortar is normally a mix of lime and sand, or
from the 1920s cement and sand. A colouring is sometimes
added. Black mortar uses crushed ash rather than
sand. In Georgian, Victorian and Edwardian houses,
the pointing between bricks and stone had a major
effect on the appearance of the buildings. The emphasis
was always supposed to be on the brickwork, rather
than the pointing. The ideal was no visible mortar.
This could be achieved by:
•using high quality engineering bricks
•'rubbed' brickwork, where the bricks were
rubbed together until they fitted closely together,
leaving a joint of 2-3mm
•'tuck' pointing, where a line of white, putty
mortar was 'tucked' into a slot cut in stained mortar
•stained mortar to hide the pointing
Most houses used, at best, the last of these, with
flush or slightly recessed pointing. Styles of pointing
included flush, tuck, bucket handle and recessed
pointing. Weatherstruck pointing was never used.
Until the 18th century, most houses
in Britain were either made from stone or wood and
clay. The latter type would use bricks for chimneys
to reduce the risk of fire.
Little used in the UK before the
14th century, bricks rose in popularity when Flemish
refugees brought bricks into East Anglia. Their
use spread and by the late 18th century, yellow
'stocks' became common in London.
In the 18th century, bricks started
to be used for all parts of smaller houses. A brick
tax was introduced 1784 and increased in 1794 and
1803. This slowed the trend but after the tax was
repealed in 1850 bricks were used almost universally
outside the stone areas.
During the period of the tax, one
alternative to wooden weatherboarding was the 'brick
tile' or 'mathematical tile'; these were tiles in
which the surface exposed below the tile in the
course above was shaped like a brick.
During the 18th century, as well
as being taxed, bricks were also less fashionable;
stucco was used to simulate stonework. Stucco frontages
ceased to be used in London in the 1850s, being
replaced by brick as the desirable material.
By the late 19th century, red bricks
were cheaper and could be used for the public side
of houses, yellows being relegated to the rear.
Using a mix of types of brick in the same wall reached
its peak in the Victorian Gothic revival.
For much of this period, bricks
were made locally; their colour was influenced by
the clays and other materials used, and by the temperature
at which they were fired. The coming of the railways
meant that bricks could be distributed more widely
and greater uniformity resulted.
The finest bricks are 'rubbed' or
ground to fit tightly with little mortar. This could
be imitated by staining the mortar to match the
bricks, and then setting a line of 'putty' into
a groove cut in the mortar as it sets.
Masonry--brick, stone, terra-cotta,
and concrete block--is found on nearly every historic
building. Structures with all-masonry exteriors
come to mind immediately, but most other buildings
at least have masonry foundations or chimneys. Although
generally considered "permanent," masonry
is subject to deterioration, especially at the mortar
joints. Repointing, also known
simply as "pointing"or--somewhat inaccurately--"tuck
pointing"*, is the process of removing deteriorated
mortar from the joints of a masonry wall and replacing
it with new mortar. Properly done, repointing restores
the visual and physical integrity of the masonry.
Improperly done, repointing not only detracts from
the appearance of the building, but may also cause
physical damage to the masonry units themselves.
So contact Multiguard Solutions
today - request a free no obligation quote from
the re-pointing professionals!
Multiguard are based in Northants
and cover all areas of the UK. We will repair commercial
and residential properties, repoint brickwork, repairs
cracked render, repair pebbledash, breezeblock extensions,
damaged brickwork
- any external brick wall repairs.
Multiguard Property Solutions UK
will repair and then paint your house or commercial
property, - offering a trowel applied textured property
coating that not only seals your property against
penetrating damp, in effect creating a weatherproof
seal, it also improves the appearance and increases
the value of your investment .
Multiguard
Property Solutions Northants UK offer free surveys,
and
a quality service.
Request a free no obligation
survey from the friendly professionals.
A quality affordable and reliable service within
the UK
NEW! ProtectGuard
CLICK on the logo to view full details!
ProtectGuard is a clear protective coating that
is completely clear
it does not leave a mark on the surface.
Protectguard
is a versatile water and oil repellent treatment
for the protection of permeable surfaces against
damp, frost, fungi growth and moss, and is ideal
for use on porous interior and exterior walls.
Protectguard has characteristics which resist
deposits caused by atmospheric pollution, and
any new surfaces treated with it retain their
new look, whilst older surfaces will stay clean
for a much longer period than untreated areas.
Protectguard deeply penetrates any porous surface
and is invisible when dry.
Protectguard is used to treat porous
surfaces which may fall victim to graffity vandals,
and will resist the penetration of paint and ink
pigments, resulting in the use of only a medium
pressure wash to remove it.
Protectguard is used to good effect
wherever there is heavy pedestrian or vehicular
traffic, footpaths, shopping areas, service stations
etc, and provides a none stick surface for dirt
and chewing gum which is easily removed after treatment.
It is
guaranteed by AXA insurance for ten years against
water, pollution and frost ingress.
Once you clean the brick or stone and apply the
protectguard
your exterior walls will remain looking like new
for a minimum of fifteen years
and it will stop penetrating damp.
Contact us for more info or
click on poster below!
Multiguard Solutions Northants UK- Experts in brickwork
repairs, mortar refill, rendering, render repair,
exterior textured wall coatings, damp treatments,
damp proofing, dampness in walls (Multiguard Solutions
plaster wall coatings as opposed to spraying) plaster
exterior wall coatings, specialize in damp prevention,
assessing and dealing with damp through walls, providing
protective coatings eg Protectacoat, wall coatings,
cellar conversions, removing damp from basements,
and more. Multiguard Solutions- formerly High Tex
Property Coatings UK -will weatherproof your house,
render pebbledash, repair substrate, rising damp,
offer substrate maintenance .... Multiguard Solutions
UK - based in Northants- offer a price that cannot
be beaten. Before you request UK property coatings
services anywhere else, give us a call. Give us
the opportunity to match any genuine professional
quote, following survey, and offer a discount.
Multiguard Solutions pride ourselves on offering
a quality property coating service - offering a
professional affordable service to all UK customers.
Multiguard Solutions offer property coatings services
in the following UK areas-
contact us with your brickwork rendering problems
or damp treatment questions today!
Offering exterior textured
property coatings, brickwork rendering, exterior
property render, damp treatment, brickwork repairs
in
the following UK areas
-
London - Central London, East London, North London,
South London, West London, South East Berkshire,
Buckinghamshire, East Sussex, Hampshire, Isle of
Wight, Kent, Oxfordshire, Surrey, West Sussex, South
West - Avon, Channel Islands, Cornwall (& Isles
of Scilly) Devon, Dorset, Gloucestershire, Somerset,
Wiltshire, West Midlands - Hereford & Worcester,
Shropshire, Staffordshire, Warwickshire, Worcestershire,
East -Bedfordshire, Cambridgeshire, Essex, Hertfordshire,
Norfolk, Suffolk, East Midlands - Derbyshire, Leicestershire,
Lincolnshire, Northamptonshire, Nottinghamshire
- North East - Cleveland, Durham, Northumberland,
Tyne & Wear - North West - Cheshire, Cumbria,
Greater Manchester, Isle of Man, Lancashire,Merseyside,
Yorkshire amd the Humberside, Humberside, North
Yorkshire, South Yorkshire, West Yorkshire
Multiguard Solutions, formerly
, HighTex Exterior textured property coatings, will
cover the UK to provide you with a quality damp
penetration and damp proof treatment service at
affordable prices!
UK Multiguard Solutions (Northants)
offer re-pointing services, brickwork repointing,
brick repointing and repairs. Repairing crumbling
walls, walls that have cracked or render needs repairing.
New brickwork rendering. Crumbling, flaking brick
walls, damaged exterior brick walls. Commercial
and residential properties